High-performance LD Steel Tameshigiri Katana

800.00$

LD is also called 7Cr7Mo2V2Si
Polishing Grade: Mirror Polishing
Heat Treatment:  Vacuum Heat Treatment
Blade Material:  LD Steel(high hardness,high toughness tool steel)
Hardness:59HRC
Toughness:110+J
Hacho:70cm/Tsuka:26cm        Curve(SORI):about 1.5cm
Tsuba:Iron                         Menuki:Brass
Seppa:Red copper         Habaki: Brass
Tsuka: Haichi                    Fuchi and Kashira:Brass
Koiguchi,Kurikata,Koiri:  Horn
Mekugiana:One
Product Weight:1191g (with saya), 987g (without saya) 

Kindly remind:  Handmade products, the data will be slightly different for each one.

Category:

Tameshigiri Katana has a hardness between  58-59HRC, and the impact toughness is 110J+, Vacuum heat treatment. It is polished by hand, and the overall hardness is too high, so it’s difficult to completely polish away the scratches on the surface. Therefore, compared with traditional art swords, its polishing looks not so beautiful. Its Hamon is a fake straight hamon made later, in order to increase its beauty.

The impact toughness of our tameshigiri katana LD is 59HRC. And the cost to make 59 or 60 is also the same. Then why don’t we make it into 60HRC? (I know some of you always pursue hardness and consider higher hardness is better.) Just because the katana is too long and it’s heat-treated overall, the impact it receives during chopping is too strong, incomparable with a short sword. Therefore the key point is to make it difficult to fracture. And reducing the hardness can greatly increase the fracture toughness, making it not that easy to fracture. (hardness dropped a bit, while fracture toughness increased a lot.) That’s why we make it 59HRC. I think we must get rid of the inherent thinking of short swords. Hardness is not always right. The difference between a short sword and a long sword are like the difference between a sports car and an off-road vehicle. They are completely different.

The advantage of modern high-performance materials when making tameshigiri katana sword is that they are more durable and have better sharpness retention. When test chopping, it is best to cut only bamboo and mats, because bamboo and mats will not let the blade get V-shaped notches.

LD is a high quality and high toughness cold work die steel, with high crack resistance and abrasion. Its bending resistance, toughness, and many other indicators exceed CPM-3V, especially the toughness index. Under the same hardness of 60, the impact toughness of LD is about 115J, and CPM-3V is 95J. They also have almost the same wear resistance, but the anti-rust performance is far behind CPM-3V. However, its price is much lower than CPM-3V. We have tested CPM-3V making standard katana, after bending resistance , side shot, and finally, the blade broke when hitting the back of the blade without a notch. This didn’t happen with the LD. That’s why we gave up on making the CPM-3V steel tameshigiri katana. Maybe we would use CPM-3V steel making tanto and wakizashi.

Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEYTameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY Tameshigiri Katana - High-performance LD Steel | Katana Sword Forge & Sale by Z-SEY

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top